Explore a complete HRP wellsite in 3D.
This is the HRP Design Studio onshore wellsite model, built from HRP's CAD models of the cylinder and GENESIS power unit, and set on a Queensland-style gravel pad with the wellhead, rod BOP, hoses and the downhole insert pump.
What you're looking at, in the model and in the field.
Each component is shown in a field photo. Click "View in 3D" to fly the model to it.
HRP hydraulic cylinder
Strokes the rod string with an internal piston and integral polished rod. Rod-end pressure lifts it and gravity returns it, with strokes up to 336".
Wellhead & rod lock BOP
The cylinder bolts onto the rod lock BOP, the primary surface barrier, which hangs the rod string during installation and workovers.
GENESIS power unit
An all-in-one HPU with the motor, hydraulic pump, valving, cooler, reservoir and controller on one skid, from 5 to 150 kW.
Hydraulic hoses
Two hoses run from the power unit to the cylinder valve block. The HPU can stand well away from the wellhead, so there are no electrics at the wellhead.
Pump controller
Change SPM, set the pump-fill target, and see live dynocards and trends, locally or over wireless.
Downhole insert pump
A rod-retrievable insert pump with a stationary barrel, plunger, and travelling and standing valves, seated in the tubing.
The same layout on Queensland wellsites.
Want this layout on your well?
We can configure the cylinder, power unit and downhole pump for your well program.